|Topic Review (Newest First)|
|09-25-2013 10:06 PM|
|grayghost||I go with a lockpick kit, it takes practice and never goes as smooth as it does in the movies, but with practice it does work.|
|09-25-2013 08:06 PM|
It takes lots of practice and timing the easiest way I found is very light pressure (twisting ) on the key and tap it with th a handle of the screwdriver also take a couple of shaves off the "stop" on hte key that limits its inward travel go to you tube and t here are or were liots of ppl with vids I prefer a pipe wrench or I have also fabricated a sheet metal tool that you pry over the door with a flat bar slide this between jamb and latch with door pushed on as if you were entering the house pull door towards you while pushing sheet metal tool towards door and it makes the latch depress and you are in Best thing for a dead bolt C4
|09-25-2013 06:56 AM|
|09-25-2013 06:55 AM|
With that being said, had you tried putting a small rubber o-ring on the bump key? It seems to make a difference. If it doesn't immediately help with the bump, it at least resets the key for the next hit.
|09-25-2013 06:10 AM|
|ADP LLC||Drill bits are free.|
|09-25-2013 05:18 AM|
|GTX63||That hand drill is no good without the high speed bit|
|09-25-2013 02:50 AM|
|Green Choppers||Lmao. I have one better. It's a cordless but some of those deadbolts have tons of steel inside and goes thru drill bits.|
|09-25-2013 01:37 AM|
Originally Posted by RServant View Post
|09-25-2013 12:30 AM|
Before GTX beats me to it.
|09-24-2013 10:24 PM|
I've tried and tried to successfully use the bump keys and hammer. So far, I've only been able to bump the Kwikset style REO locks. I have had no success with the real Kwikset locks.
Any of y'all had any better success? Suggestions?