REO Property Preservation Forum banner

1 - 4 of 4 Posts
9

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Contractors, I have a customer that needs new locks and deadbolts on exterior doors that are 2-1/4" thick (backsets must be 2-3/4"). Standard locks won't reach to the other side. I have done some online searches and left messages with manufacturers, but have not found a source. Do you have a source for locks for thick doors? Thanks for your thoughts! I'm in South Central Minnesota
 
D

·
Guest
Joined
·
0 Posts
Discussion Starter #3
I would say most Handle sets with a 2 3/4 backset would work. All commercial locksets would work. Your only problem you could run into is the through bolts to the stem posts being to short. But thats a easy fix. I would install all mortise body locksets. There probably nice big heavy doors intall mortise bodys and pick out nice knobs or levers.
 

·
Registered
Joined
·
2,016 Posts
detroit687 said:
I would say most Handle sets with a 2 3/4 backset would work. All commercial locksets would work. Your only problem you could run into is the through bolts to the stem posts being to short. But thats a easy fix. I would install all mortise body locksets. There probably nice big heavy doors intall mortise bodys and pick out nice knobs or levers.
Post some pix. Perhaps I can give you advice.
 
1 - 4 of 4 Posts
Top